(3 votes, average: 5.00 out of 5)
Loading ...Sun 29 Jun 2008
How to configure Cisco Unified Call Manager Express GUI using GNS3
Posted by Tariq Ahmad under Cisco Unified Call Manager Express , GNS3 , GNS3 video tutorials[13] Comments
Email This Post
It goes without saying that GNS3 has eased things alot. In this tutorial, i will show step-by-step how you can setup your Call Manager Express (CME) router’s Graphical Interface (GUI) using GNS3 and use it for router’s configuration.CME GUI will give you similar look and feel like SDM.Both are web based management tools with different functionalities.
CME GUI extends well into Cisco Unity Express(CUE) management if you have physical router with CUE-module in it. Unfortunately, CUE cannot be simulated here .Once you setup basic parameters using CLI, web interface will help you in long run.
BASIC IOS CONFIGURATIONS:
- –>ip http server
- –>ip http path flash:
- –>telephony-service
- –>web admin system name admin password cisco
- –>dn-webedit
- –>time-webedit
CME GUI URL :
http://ipaddressofcmerouter/ccme.html
Enjoy!
If you liked this tutorial ,don't hesitate to buy me a Cup of Coffee today !
Loading ...
August 7th, 2008 at 8:18 am
You made my day buddy! Thanks a zillion!
August 20th, 2008 at 8:14 am
Where can we download the cme-qui-4.1.0.1.tar file from?
August 20th, 2008 at 8:25 am
You need to have CCO access. Here is the link for downloading CME related stuff:
http://www.cisco.com/pcgi-bin/tablebuild.pl/ip-iostsp
Thanks!
September 22nd, 2008 at 1:50 pm
Hi.Nice tutorial ! Can you help me setup CUCME with Cisco Unity ?
September 25th, 2008 at 3:47 am
Thank you. It was very helpfull..
September 25th, 2008 at 8:35 am
@Kumar, Keep tuned in as i will post a tutorial for Cisco Unity setup in near future.
@Syed, You are welcome !
February 25th, 2009 at 2:14 am
Great Post keep it up i like your posts and videos.
March 6th, 2009 at 2:21 am
there isn’t a tutorial with Basic-ACD?
May 24th, 2009 at 9:17 am
Nice one mate . keep up the good work. that was good.
cheerz
July 14th, 2009 at 9:08 am
I can get up and running with your instructions, however my flash is erased every time I stop the router. My startup-config is saved, but flash doesn’t. Any ideas?
October 11th, 2009 at 2:59 pm
when tried this command in router 3725 “archive tar /xtract tftp://192.168.1.1/cme-gui-3.0.3.tar”
I got an error command not found how I can make sure this command would work the problem is the router IOS doesn’t understand this command ???!!
November 7th, 2009 at 5:42 pm
Hi,
May i know what is the error as below:
%Error writing flash:/admin_user.html (Device in exclusive use)
thks alot
-Gilbert
December 4th, 2009 at 11:06 am
Why do you ping 6.6.6.5 ?
How do you create it?
Nice tutorial!
Thx a lot