CCIE Quest

18 Responses to “How to register Third party SIP phone to CUCM 5.x/6.x/7.x/8.x(Cisco Unified Communication Manager)”

1. ccietrain says:

   July 9, 2008 at 9:57 pm

   Thanks alot ! i have been looking for this from a long time.
2. titan says:

   July 23, 2008 at 2:12 am

   Thanks
3. Lara Losi says:

   August 9, 2008 at 9:50 pm

   Thanks aloto!!!!!!!
4. Wlater says:

   August 10, 2008 at 12:17 am

   Great site,thanks for your help.
   But I can’t play this tutorial,would you like to check it? thanks.
5. admin says:

   August 10, 2008 at 4:09 pm

   @Wlater, Link is working perfectly OK.
6. Wlater says:

   August 10, 2008 at 9:56 pm

   Thanks. I have found the problem is my IE browser,I use firefox can open it.thank you very much.
7. Wlater says:

   August 10, 2008 at 10:08 pm

   by the way , would you like to tell me what tools you use to creat the tutorial? thanks a lot.
8. admin says:

   August 28, 2008 at 5:26 pm

   I am using ‘Wink’ for creating tutorials!
9. Taher says:

   August 29, 2008 at 5:25 am

   Thanks for SIP with CUCM and wher i can found in x-lite mac address? and i dont have any SIP hard phone or device how i can registred?
10. admin says:

    September 2, 2008 at 8:28 am

    @Taher,If you are asking about SIP phone, you can download SIP softphone from the links mentioned at end of this post.Sure,you can use any hardware SIP phones with CUCM as well and it will work just fine.You can find your SIP device MAC address listed in CUCM phone administration page.I hope this answers your query!

    Let me know if you need any further info.
    Thanks!
11. BrainBump.net >> Getting Cisco Unified Communications Manager 7.0 Up and Running using VMware! | CCIE Quest says:

    December 25, 2008 at 4:59 am

    [...] This tutorial will cover post-installation steps to get CUCM 7.x up and running ! Furthermore, i will walk you through the process of registering Cisco IP devices to your CUCM 7.x. For registering 3rd party SIP phones e.g X-lite to CUCM 7.x , same steps are required as i showed in a previous tutorial. [...]
12. Marcos Silva says:

    December 29, 2008 at 8:33 am

    Thank you very much for this tutorial works great but i have a question how about register a sip device whith multiple lines?
13. JonW says:

    February 27, 2009 at 11:43 am

    Is there a way to do this with an AD integrated system? I could probably create dummy AD accounts, but I would prefer not to.
14. admin says:

    April 4, 2009 at 1:49 am

    @JonW,Yes, CUCM can be integrated with AD.Look for configuration guides on Cisco.com

    Thanks guys for liking tutorials.
15. Scott says:

    April 4, 2009 at 3:45 am

    Nice work! I am looking for converting my SCCP 7960 ip phone to SIP image.Please produce a tutorial on that as well !

    Thumbs up 4 u!
16. Taufiq says:

    January 6, 2010 at 4:02 am

    have tried using FAC feature in SIP phone (xlite or other product) ?
17. opnine says:

    January 22, 2011 at 8:26 am

    hello, i cant see the video? where can i find it?

    thanks
18. Giuseppe says:

    March 16, 2011 at 3:49 am

    I can’t see the video, there’s no play tutorial button, please could you check it? thanks.