Comments on: GNS3:How to install and enable ASDM (PIX firewall)

By: Tayyab

Tayyab — Thu, 15 Jul 2010 04:51:34 +0000

Hy Sir,

how will i attache asdm with pix to configure for Vpn,as i am using pix803 image with pix,which image will use with asdm and how to attach asdm with gns/Pix
Kinldy guide me step by step…thanx

By: Jay-ar

Jay-ar — Wed, 09 Jun 2010 09:28:40 +0000

Good job dude!

By: Max

Max — Tue, 08 Jun 2010 09:59:37 +0000

Dear Admin,
Thanx for the tutorial.

I am receiving the following error message in Firefox :
Data Transfer Interrupted
The connection to 10.0.1.1 was interrupted while the page was loading

Pls help me to sort it out
Thanks!

By: LLoyd

LLoyd — Fri, 30 Apr 2010 21:40:38 +0000

Hi Onyechi, check the file image that you downloaded in DOS it might have a asdm-631.bin.html extension , simply rename the file ren asdm-631.bin.html to asdm-631.bin

By: Onyechi

Onyechi — Mon, 12 Apr 2010 09:12:50 +0000

Hello Admin,

Great tutorial, the steps outline in the tutorial are accurate, but i have a problem. Presently i have both ASA with IOS image 8.02 and PIX with IOS image 724 configured on GNS3. As stated in the tutorial i have created a ms loop-back interface with an ip address of 10.10.10.10/24, configured the ASA with e0/1 as the inside interface with an ip address of 10.10.10.1/24.
Pings from the loop-back interface to the (inside)e0/1 interface of the ASA and also from the inside interface e0/1 to the loop-back interface are successful.
On initiating the transfer of the asdm image from the tftp server to the ASA I get this error (%Error reading tftp://10.10.10.10/asdm-631.bin (Could not find file ‘C:\TFTP-Roo t\asdm-631.bin’.)
I used the same process on the pix and got this %Error reading tftp://10.10.10.10/asdm-631.bin (Could not find file ‘C:\TFTP-Roo t\asdm-524.bin’.)
I have used two tftp servers pumpkin and Solar-Wind tftp server but i still get the above error. At present i am using solarwinds and have loaded the asdm images in the TFTP-Root directory.
Could you please help out, am i missing something?

By: abnormaltech

abnormaltech — Tue, 30 Mar 2010 15:39:13 +0000

hi, admin
you have any idea why i get this error message each time i try to connect to the asdm.

Error message in Firefox
Data Transfer Interrupted
The connection to 192.168.185 was interrupted while the page was loading.

By: Shafat

Shafat — Wed, 03 Mar 2010 16:14:50 +0000

Hi,

Great tutorial. Can we also use ASA images in GNS3 ? If yes which version of GNS3 i need to download?Please help.
Thanks

By: Jesus Guibert

Jesus Guibert — Wed, 24 Feb 2010 03:06:36 +0000

EveryOne there is a bug,that don’t let you comunicate switch with pix. The solution is a modification of our .net file. Add the following line in the firewall section in my case:
e1=SW1 2
All section next:
[[FW FW1]]
x = -284.0
y = -177.0
e1=SW1 2

With the sintaxis:
e+number_port=nameof_switch port_number
after the modification open the GNS3 and must works!
The other problem i see was the pings works between the pix and the client pc but don’t work the webaccess, the webaccess and asdm access work only if you provide a serial and activation code.Because by default the licence don’t let you do nothing…
Good Luck!!!

By: trist

trist — Sat, 23 Jan 2010 13:38:24 +0000

same error as Pavan..
i did exacly as tutorial said
added cloud switch and pix
i cant connect switch with pix.
router is connected to pix without problem

By: Tman

Tman — Wed, 06 Jan 2010 21:35:04 +0000

I am having the same issue as pavan. I am unable to connect the PIX to the switch. I can connect the internet to the switch fine though. Did something change from .6 to .7RC1?