If you have gone through all previous parts of this tutorial, you have learned to configure CUCME for SIP trunk support to a VOIP SIP Internet Service Provider (ITSP) ,configuring Inbound and outbound dial peers for call routing as well as configuring and supporting IP phones(e.g.CIPC).This is the last part of tutorial in which you will configure a SIP endpoint for same purpose.I will use X-lite for this tutorial although,you can configure any SIP Softphone in the same way.
Remember, you will need a SIP VOIP Internet Phone Service Account in order to setup this tutorial .
If you haven’t signed up for an account yet , get yourself a Free SIP ITSP Signup account here before moving forward.

Enjoy !
Related Posts
Tags: Call Manager Express, Cisco Unified Communication Manager Express, CME, CUCME, dynagen, dynamips, free voip sip internet phone service, GNS3, Graphical Network Simulator, ip based telephony, Service Provider, Session Initiation Protocol, SIP, sip service provider, sip trunk, sip voip dail-peer, trunk, voice over ip, VOIP



Thankyou
Nice work!