This write-up will explain Qemu Image use in GNS3 . Qemu Host image can be either CLI ( Microcore ) or GUI (Tinycore).Its basically a small linux image which can be used for performing some basic connectivity tasks e.g telnet, ssh, iptables, route, tcpdump and IPv6 support. This tutorial will walk you through step by [...]

Read more about GNS3: Add Qemu Host (MicroCore) »

  If you have gone through all previous parts of this tutorial, you have  learned to configure CUCME for SIP trunk support to a VOIP SIP Internet Service Provider (ITSP) ,configuring  Inbound and outbound dial peers for call routing as well as configuring and supporting IP phones(e.g.CIPC).This is the last part of tutorial in which [...]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 3 »

In one of my previous tutorials, i had used Putty Connection Manager for Console Access which helps centralizing all your consoles into a single window with easy tabbing in between different router consoles. This tutorial shows yet another way of achieving same functionality.This time, i  will setup an Access Server/Console Server/Terminal Server, whatever you name [...]

Read more about GNS3: How to setup Terminal Server for CCIE Labs »

This tutorial will help those who are having problems with insufficient flash disk capacity in Cisco Call Manager Express (CUCME) configurations. In order to copy files e.g Music-on-hold files, GUI  files, Basic-ACD scripts and prompts to your flash, you need to have considerable amount of disk space to house all stuff there. Fortunately, you can [...]

Read more about GNS3: How to increase Call Manager Express flash disk Size »

This tutorial will demonstrate process of setting up a Session Initiatition Protocol (SIP) trunk on Cisco Unified Express Communication Manager Express (CUCME) to SIP Voice Over IP (VOIP) Service Provider. It will be divided into several parts. This is first part in which you will learn to setup Basic SIP trunking with VOIP service provider. [...]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 1 »

In this tutorial, i will demonstrate configuration of IPv6 addressing in both Windows XP machine and Cisco Router (GNS3).One of most flexible migration approach to IPv6 will be  “Dual-stack” approach which means that network devices will have both IPv4 and IPv6 addresses simultaneosly. Both TCP/IPv4 and TCP/IPv6 protocol stacks will work together seamlessly for quite [...]

Read more about GNS3: How to configure and setup IPv6 connectivity between Windows XP and Cisco Router »

hide totop
  • RSS
  • Facebook
  • Twitter
  • RSS
  • Facebook
  • Twitter