In a previous tutorial, i had showed how to use Cisco Unified Communications Manager Express (CUCME) Graphical User Interface(GUI) in order to configure Unified CME in GNS3. Here, i will show you step-by-step how you can setup Unified CME router in GNS3 using telephony-setup wizard. I have used Cisco IP Communicator (CIPC ) in this tutorial.You can integrate different IP phone’s (SIP IP phones e.g X-lite , SJphone ) with SCCP based IP Phones using CME router in order to setup a full-blown Small-Office Home-Office (SOHO) environment.
If you want to have ability to use multiple SCCP phones to test on your XP/Vista machines, you can use CIPC as well as IPblue’s VTGO-PC softphone. VTGO has added advantage that it offers ability to run multiple instances of SCCP phone so,you have more flexibility at your disposal.
Cheerz!
Enjoy!
Related Posts
Tags: Call Manager Express, CIPC, Cisco IP Communicator, Cisco Unifed Call Manager Express, CME, CUCME, dynagen, dynamips, GNS3, gns3 tutorials, GNS3 video tutorials, Graphical Network Simulator, Graphical User Interface, GUI, SCCP
Cisco Secure ACS 5.X Deployment Guide E-Book
FlexVPN Lab Guide/Handbook
CCIE Voice Lab Practice Guide
RSS
Facebook
Twitter
Admin
you are pinging on 192.168.15.1 but you have registered your CME on 192.168.15.6.
why?
Hello!
Can you please tell me if you can connect a H.323 terminal (Netmeeting, Ekiga) to CME emulated in GNS3? Also some guidelines are more then appreciated.
Thank you very much!
Hy there!
Very useful information you gave me.
I am trying to configure a MGCP Gateway (Call Agent) in order to connect a PSTN through an adaptor. Can you please tell me the additional commands for configurating the gateway in order to perform calls. Thanks
Hi,
for those who have problems with the “achive /xtract” command (especially with creating directories).
Here’s a possible solution…
First erase the flash:
cme#erase flash:
Erasing the flash filesystem will remove all files! Continue? [confirm]
Erasing device… eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee …erased
Erase of flash: complete
And afterwards format it:
cme#format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in “flash:”. Continue? [confirm]
Current Low End File System flash card in flash: will be formatted into DOS File System flash card! Continue? [confirm]
Primary Partition created…Size 192 MB
Drive communication & 1st Sector Write OK…
Writing Monlib sectors….
Monlib write complete
Format: All system sectors written. OK…
Format: Total sectors in formatted partition: 393184
Format: Total bytes in formatted partition: 201310208
Format: Operation completed successfully.
Format of flash: complete
cme#
Now, “archive” will create the directories:
cme#archive tar /xtract tftp://192.168.222.143/cme-full-4.3.0.0.tar flash:
Loading cme-full-4.3.0.0.tar from 192.168.222.143 (via FastEthernet0/0): !
bacdprompts/ (directory) 0 (bytes)
~
Desktops/ (directory) 0 (bytes)
Desktops/320x212x12/ (directory) 0 (bytes)
~
gui/ (directory) 0 (bytes)
~
phone/ (directory) 0 (bytes)
phone/7945-7965/ (directory) 0 (bytes)
~
phone/7937/ (directory) 0 (bytes)
~
phone/7914/ (directory) 0 (bytes)
~
phone/7906-7911/ (directory) 0 (bytes)
~
phone/7920/ (directory) 0 (bytes)
~
phone/7931/ (directory) 0 (bytes)
~
phone/7942-7962/ (directory) 0 (bytes)
~
phone/7921/ (directory) 0 (bytes)
extracting phone/7921/APPS-1.1.1.SBN (2559783 bytes)!!!!!!!
(output shortened)
Hope this helps…
Regards,
Alex
Hi,
I am tried the tutorial. Everything is working fine, phones are registering, extract went fine, however i cannot get the CME gui. I get only the basic router config html
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/gui
!
The file seems to be properly extracted:
7 0 Mar 01 2002 00:54:16 gui
8 953 Mar 01 2002 00:54:16 gui/Delete.gif
9 3845 Mar 01 2002 00:54:18 gui/admin_user.html
0 647358 Mar 01 2002 00:55:08 gui/admin_user.js
1 1029 Mar 01 2002 00:55:10 gui/CiscoLogo.gif
2 174 Mar 01 2002 00:55:12 gui/Tab.gif
3 16344 Mar 01 2002 00:55:12 gui/dom.js
4 864 Mar 01 2002 00:55:14 gui/downarrow.gif
5 6328 Mar 01 2002 00:55:16 gui/ephone_admin.html
6 4558 Mar 01 2002 00:55:16 gui/logohome.gif
7 3724 Mar 01 2002 00:55:18 gui/normal_user.html
8 76699 Mar 01 2002 00:55:24 gui/normal_user.js
9 843 Mar 01 2002 00:55:26 gui/sxiconad.gif
0 1347 Mar 01 2002 00:55:26 gui/Plus.gif
1 2399 Mar 01 2002 00:55:28 gui/telephony_service.html
2 870 Mar 01 2002 00:55:28 gui/uparrow.gif
3 9968 Mar 01 2002 00:55:30 gui/xml-test.html
4 3412 Mar 01 2002 00:55:32 gui/xml.template
I have also enabled on telephony-service as well:
moh flash:music-on-hold.au
multicast moh 239.1.1.1 port 2100
web admin system name cisco1 password cisco1
dn-webedit
time-webedit
Do you have any suggestions please why it is not working?
May post 2 questions?
1) How many SIP call can make with 2 MB MPLS? (Using Cisco products)
2) Cluster site call to CME site can not hear from Cluster but can hear from CME site
- calling from CME site both can hear it well..
what is the possible issue one option 2)?
net-gyver, the format flash command worked great. Thanks for saving us!
Hi all,
I’m using Cisco IOS 12.4(15)T5 Advanced Enterprise on router 2961 for this lab.
IP Communicator and Sip Softphone can register to CME, I can call from Sip Phone to IP Phone but I cannot call from IP Phone to Sip Phone. There are no signal, no ring on Sip Phone when calling from IP Phone.
Here my “show run” and “show flash:”
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface FastEthernet0/1
bind media source-interface FastEthernet0/1
registrar server
!
!
!
voice register global
mode cme
source-address 172.16.2.1 port 5060
max-dn 2
max-pool 2
authenticate register
tftp-path flash:
file text
create profile sync 0000545090332833
!
voice register dn 1
number 1111
allow watch
name XLITE
!
voice register dn 2
number 3333
allow watch
name ETALK
!
voice register pool 1
id mac 0200.4C4F.4F51
number 1 dn 1
dtmf-relay rtp-nte
username 1111 password cisco
codec g711ulaw
!
voice register pool 2
id mac 0200.4C4F.4F53
number 1 dn 2
dtmf-relay sip-notify
username 3333 password cisco
codec g711ulaw
!
!
!
archive
log config
hidekeys
!
!
!
interface FastEthernet0/1
ip address 172.16.2.1 255.255.255.0
speed 100
full-duplex
!
ip forward-protocol nd
!
!
!
!
telephony-service
max-ephones 2
max-dn 2
ip source-address 172.16.2.1 port 2000
system message Cisco VOIP
cnf-file location flash:
cnf-file perphone
max-conferences 4 gain -6
transfer-system full-consult
!
!
ephone-dn 1
number 2222
name IPPHONE
!
!
!
ephone 1
device-security-mode none
mac-address 0200.4C4F.4F52
username “2222″ password cisco
type CIPC
button 1:1
!
!
!
R2#show flash:
System CompactFlash directory:
File Length Name/status
1 69 syncinfo.xml [deleted]
2 1825 SIPDefault.cnf [deleted]
3 3579 softkeyDefault_kpml.xml [deleted]
4 3613 softkeyDefault.xml [deleted]
5 69 syncinfo.xml
6 1825 SIPDefault.cnf
7 3579 softkeyDefault_kpml.xml
8 3613 softkeyDefault.xml
[18704 bytes used, 16758508 available, 16777212 total]
16384K bytes of ATA System CompactFlash (Read/Write)
Please help me. Thanks a lot.
to net-gyver
i can do it ¡¡¡ until I read your post, I can’t setup gns3 for work with cme-full-4.3.0.0.tar, thank you for you help, now I can practice for my ccna voice
“for those who have problems with the “achive /xtract” command (especially with creating directories).
Here’s a possible solution…
First erase the flash:
cme#erase flash:
Erasing the flash filesystem will remove all files! Continue? [confirm]
Erasing device… eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee …erased
Erase of flash: complete
And afterwards format it:
cme#format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in “flash:”. Continue? [confirm]
Current Low End File System flash card in flash: will be formatted into DOS File System flash card! Continue? [confirm]
Primary Partition created…Size 192 MB
Drive communication & 1st Sector Write OK…
Writing Monlib sectors….
Monlib write complete
Format: All system sectors written. OK…
Format: Total sectors in formatted partition: 393184
Format: Total bytes in formatted partition: 201310208
Format: Operation completed successfully.
Format of flash: complete
cme#
Now, “archive” will create the directories:
cme#archive tar /xtract tftp://192.168.222.143/cme-full-4.3.0.0.tar flash:”
Hi
what files do i need on the tftp server with this.
My IP Communicator will not register.
Hello,
I following any step but i didn’t found command telephony-service setup….
why?
wich version to use?
Hello, i follow all the steps and i get success in register IP Comunicator phone. but when i try to make a call the phone start to ring when i answer the call is dropped.
and please can someone tell me if is possible to register SPA502G with CME?
bellow is my config.
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CCME
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
no ip dhcp use vrf connected
!
ip dhcp pool ITS
network 192.168.15.0 255.255.255.0
option 150 ip 192.168.15.10
default-router 192.168.15.10
!
!
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
!
!
!
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.15.10 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
telephony-service
max-ephones 2
max-dn 2
ip source-address 192.168.15.10 port 2000
auto assign 1 to 2
system message MY LAB
user-locale PT
create cnf-files version-stamp Jan 01 2002 00:00:00
max-conferences 8 gain -6
transfer-system full-consult
!
!
ephone-dn 1
number 2001
description LINE 1
name LINE1
!
!
ephone-dn 2
number 2002
!
!
ephone 1
mac-address 0015.B7CC.C1E6
type CIPC
button 1:1 2:2
!
!
!
ephone 2
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
Can anybody guide me along on how to do this step-by-step? I really need help. Anybody kind enough?
Cannot currently create files. Please verify CME configuration or wait until p revious file generation is complete, and then re-issue this command.
Hi All,
please help me with this one. I am not able to figure this one out since last 2 days…
I am using GNS for A voice lab. i have chosen 3700 series router 3725 router .. and by using a cloud i am able to ping my laptop which is acting as a TFTP server for time bieng for the router 3725 .
{NOW just to share i did this lab 1 month back sucessfully and i dont what ghost is there in the router which is not letting the magic happen this time..}
I issue the command
archive tar /xtract tftp://192.168.15.12/cme-full-7.0.0.0.tar flash:
and all the tar files gets extract to the flash of my router. (virtual flash in GNS.)
Then i make aliases
tftp-server flash:/phone/7945-7965/apps45.8-3-2-27.sbn alias apps45.8-3-2-27.sbn
tftp-server flash:/phone/7945-7965/cnu45.8-3-2-27.sbn alias cnu45.8-3-2-27.sbn
tftp-server flash:/phone/7945-7965/cvm45sccp.8-3-2-27.sbn alias cvm45sccp.8-3-2-27.sbn
tftp-server flash:/phone/7945-7965/dsp45.8-3-2-27.sbn alias dsp45.8-3-2-27.sbn
tftp-server flash:/phone/7945-7965/jar45sccp.8-3-2-27.sbn alias jar45sccp.8-3-2-27.sbn
tftp-server flash:/phone/7945-7965/SCCP45.8-3-3S.loads alias SCCP45.8-3-3S.loads
tftp-server flash:/phone/7945-7965/term45.default.loads alias term45.default.loads
tftp-server flash:/phone/7945-7965/term65.default.loads alias term65.default.loads
tftp-server flash:/phone/7945-7965/apps37sccp.1-1-1-1.bin alias apps37sccp.1-1-1-1.bin
after creating the aliases i hit LOAD command and
load 7945 SCCP45.8-3-3S.loads
As given in books when we hit load command i should get updating CNF files prompt.
CME_Voice(config-telephony)# load 7960 P00308000500
Updating CNF files
CNF files updating complete
BUt i dont get any.. however the command gets accepted..
secondly, when i try to create the cnf files manually
and issue the command create cnf-files
I GET THE ERROR
Cannot currently create files. Please verify CME configuration or wait until previous file generation is complete, and then re-issue this command.
Please suggest how can i solve this problem..
I have tried..
Reinstalling GNS and loading the image..for the router..
I have tried deleting the temp folder and trying all the steps again.
Thanks in advance
Hi,
I had a bit of trouble getting this working. This is what I did:
(System: Windows 7 ultimate 64bit GNS3 v0.8.1 VBE all-in-one)
1) Create a loopback interface in windows
i) Device Manager
ii) Right click on ‘top’ entry (in my case ‘Rob-Laptop’)
iii) Click ‘Add legacy hardware’
iv) select ‘install hardware that I manually select from a list’
v) select ‘network adaptors’
vi) select manufacturer ‘microsoft’ and network adaptor ‘Microsoft Loopback Adaptor’
2) Configure the new loopback interface:
i) Open control panel and select ‘network and sharing centre’
ii) Select ‘Change adapter settings’
iii) Double click the new loopback interface
iv) click on ‘properties’
v) double click on ‘internet protocol version 4′
vi) manually assign the ip address 192.168.15.1 255.255.255.0
vii) Click ‘ok’
3) Reboot your PC
4) Open GNS3 and follow the video guide. When configuring the cloud, select the loopback interface, rather then the physical interface as stated in the guide. Configure the router as instructed in the guide and you should be able to ping 192.168.15.1 (the IP address of the loopback) – i.e. GNS3 router is now communicating with your windows desktop
5) When launching ‘Cisco IP Communicator’ do it via the start menu. Right click on the program and select ‘run as administrator’ (this a is very important step and will allow you to configure the network settings for this ‘device’) .
6) Right click on the Cisco IP phone and select ‘preferences’. Now select the ‘network’ tab. Ensure that ‘Microsoft Loopback Adapter’ is selected as the ‘network adapter’. Ensure that the TFTP server option is set to ‘Use these TFTP servers’ and ‘TFTP Server 1′ = 192.168.15.6
7) Click OK
Your ‘phone’ should now register with the router in GNS as shown in the video guide.
I couldn’t work out why the guide was attempting to ping 192.168.15.1 when it hadn’t been mentioned before in the guide.
I hope that helps anybody struggling like I was.