In a previous tutorial, i had showed how to use Cisco Unified Communications Manager Express (CUCME) Graphical User Interface(GUI) in order to configure Unified CME in GNS3. Here, i will show you step-by-step how you can setup Unified CME router in GNS3 using telephony-setup wizard. I have used Cisco IP Communicator (CIPC ) in this tutorial.You can integrate different IP phone’s (SIP IP phones e.g X-lite , SJphone ) with SCCP based IP Phones using CME router in order to setup a full-blown Small-Office Home-Office (SOHO) environment.
If you want to have ability to use multiple SCCP phones to test on your XP/Vista machines, you can use CIPC as well as IPblue’s VTGO-PC softphone. VTGO has added advantage that it offers ability to run multiple instances of SCCP phone so,you have more flexibility at your disposal.
Cheerz!
Enjoy!
Related Posts
Tags: Call Manager Express, CIPC, Cisco IP Communicator, Cisco Unifed Call Manager Express, CME, CUCME, dynagen, dynamips, GNS3, gns3 tutorials, GNS3 video tutorials, Graphical Network Simulator, Graphical User Interface, GUI, SCCP
RSS
Facebook
Twitter
Do you use VMware to run GNS3?
Do I need to run the archive command and unzip the CME to the router for the TFTP to work for the CIPC to work?
I get error messages that show up on solarwindz that says error SB…xml
And my CIPC phone never registers.
By the way you are GOD sent. I just started studying and I do not have the cash to purchase lab equip. So these tutorials are excellent.
No.I don’t.I run it natively on my machine as you can see in tutorial.It would be waste of system resources if vmware is used solely for running gns3, in my view.
Archive command helps you copy files to router’s flash and extract them in one go rather than doing it manually for each single file.You don’t need it for this scenario.
You don’t need Solarwinds TFTP server for this to work.Check connectivity b/w your CIPC and CME router and if you have configured CME correctly, it should work just fine.
Thanks for appreciation.Please go through tutorial step-by-step.You won’t face any problems then.
This is probably a no brainer but CIPC registered with 192.168.15.10, is this CCM ?
what CCM version are you running and is it bridged with the loopback adapter ?
Can CIPC connect to CME with out registering with the CME and downloading a tftp file ?
This site rocks !!
CIPC registered to CME and not CCM.CME was configured with Ip address: 192.168.15.6 although it could be any IP address as you like.
If you mean CME version , this tutorial covered CME version 4.1.
No,you must register it to either CME or CCM in order to work.
Thanks!
The reason i asked is because on starting CIPC it asks for a tftp server; on cancelling the option it goes to the preferences page where i select the microsft loopback adapter. But it does not register with the CME. Connecetivity is not a problem between the looback and the CME. Im using CIPC ver 2.1.2.0.
Could you tell me how to setup CIPC to communicate with the CME?
@Lc, You need to specify TFTP server IP address(192.168.15.6) in CIPC preference page in order to register it to CME.
Thanks!
It worked as you said, thanks for my first step to CCVP from the NP.
Great to know that. Welcome Onboard to CCVP/CCIE Voice journey!!!
can you tell me why i do not have the “voice register global” command? i only have “voice register pool”.
i have run the 3725 and 3745 Enterprise IOSs. i have also tried the 2691 and the 3625.
i followed the tutorial with each, but i still don’t have the “voice register global” command available.
i have googled and googled … nothing.
thanks a bunch.
You need to have Cisco IOS release 12.4(4)T or later for voice register global command to work.
This Command Reference guide will help you find more details:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_v1ht.html#wp1016309
Thanks
WG2R1#sh ver
Cisco IOS Software, 3600 Software (C3640-A3JS-M), Version 12.4(19b), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 13-Jun-08 08:17 by prod_rel_team
ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3640-A3JS-M), Version 12.4(19b), RELEASE SOFTWARE (fc1)
WG2R1 uptime is 19 hours, 10 minutes
System returned to ROM by unknown reload cause – suspect boot_data[BOOT_COUNT] 0×0, BOOT_COUNT 0, BOOTDATA 19
System image file is “tftp://255.255.255.255/unknown”
Cisco 3640 (R4700) processor (revision 0xFF) with 187392K/9216K bytes of memory.
Processor board ID 00000000
R4700 CPU at 100MHz, Implementation 33, Rev 1.2
1 FastEthernet interface
4 Serial interfaces
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0×2102
————————————————
that’s my Show Version (obviously
)
when i try the Voice Register command, i get the following:
WG2R1(config)#voice register ?
pool Define pool tag
WG2R1(config)#voice register
am i missing something blatantly obvious???
thanks again…
jim
Jim, you are using the ‘mainline or non-T release’.You would require Cisco IOS release 12.4(4)T (Train release) as i mentiioned earlier.
As far as difference b/w two releases goes, here is what cisco has to say:
“The mainline or non-T release accumulates features in the 12.3 T and “letter” releases. New features will be added to the 12.4 T train of releases, whereas 12.4 mainline is for bug fixes.”
Hope this helps!
Hello again, please I need to connected my gns3 topology to a cloud to connect my local PC (where I am running Gns3).
I have connected other external PC by your begin explication and all ok; for that I created a NIO TAP by bridge interface in linux, but now, to connect my local PC to the cloud I suppose that now I need to create a linux Nio Ethernet. Do you now anythings?
Best regards.
Please, You can check with the IOS version:
c3745-adventerprisek9-mz.124-15.T6.bin
Now, with this version I can place the comand:
“voice register global”
Hi Admin,
I can’t ping my GNS3 CME router from my PC.Not sure how to bind the interface. Can you help please? To access CME this way would be fantastic
Cheers
Rich
Rich,I have shown in several tutorials the way you can bind physical interface/virtual interface/loopback interface to your GNS3 router.You will need to bind your Network Cloud to proper physical/virtual interface in GNS3 by simply selecting the proper interface and hitting ‘add’ button. Then , you can attach that interface to your router’s fast ethernet interface and ping should work from both sides.If you can’t ping , check your PC firewall settings and make sure that ping is allowed.I hope this will be helpful for you.Let me know if you need any further help.
Thanks!
@Ktmr23 , please be more specific with your question.I couldn’t get it.If you are looking for “voice register global” command to work,you need to have Cisco IOS release 12.4(4)T or later . Check “Cisco’s Feature Navigator” http://www.cisco.com/web/go/fn for more detail.
hi, i have done all things, my pc is able to ping the GNS3 router, but IP Comunicator is not been get registered. im geting “Registeration Rejected:Max Phones Exceeded” error on IP Communicator screen and on CME im getting this error
”
R-1#
*Mar 1 00:14:30.735: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP02004C4F4F50 IP:
10.0.0.10 Socket:1 DeviceType:Phone has unregistered normally.
*Mar 1 00:14:41.639: %IPPHONE-6-REG_ALARM: 22: Name=SEP02004C4F4F50 Load= 2.1.4
.0 Last=Reset-Reset
*Mar 1 00:14:41.771: %IPPHONE-6-REG_ALARM: 24: Name=SEP02004C4F4F50 Load= 2.1.4
.0 Last=Phone-Reg-Rej
R-1# ”
can u pleas tell me where im doing mistake?
when i start the IP Communicator for 1sec it shows it get registered and then again it start to search tftp-server. in setting of IPCommunicator i have put ip of cme router as tftp-server address .. please help me its really urgent im facing this problem from 1week …
Hi!
I am new in VoIP, I reproduced all steps as shown in your video, but the phone cannot find xml load files SEP0..xml, XMLdefault.cnf.xml and Ldapdialingrules.xml, etc… (according to tftp logs), there is no such files (or any directory structure) related to the softphone in my tftp.
I guess I missed something obvious, are those files somehow automatically generated? or I have to copy them manually? if so where from?
Thank you in advance!
Anis, “Max Phones Exceeded Error” is related to ‘max-ephones’ configuration under telephony setup. Set this value to number of ephones you have in your network.Sample configuration would look like this:
CUCME(config)#telephony-setup
CUCME(config-telephony)#ip source-address X.X.X.X
CUCME(config-telephony)#max-ephone 5
CUCME(config-telephony)#max-dn 10
Here,i have set maximum ephones to 5 and max no of directory numbers (DN’s) to 10. By following this approach, you should be able to get rid of error.
Also, for setting TFTP address, Under Preferences Option in Cisco IP Communicator, you should be able to setup TFTP server address to source IP address of CUCME.
Hope this helps!
@ajn, you are missing a command under telephony-setup which is “create cnf-files”.This command is required in order for CUCME to create configuration files (cnf) XML files and push them over to Cisco Ip Communicator when it registers. This will resolve your problem!
You may use “debug tftp events” command which comes in handy for troubleshooting purposes.
First of all, let me congratulate you on doing a fabolous job. It is very useful for lots of people who are trying to setup virtual lab at home.
I am having a problem establishing a connection between the CME router and the cloud. I am using the 7200 router and my IOS version is 12.4(T). I have 4 adaptor on my Windows XP, wireless and 3 VMnet. I am able to ping all these adaptors in windows.
When I try to connect the CME router to the cloud, I keep getting following error;
205-VM R1 : unable to add binding for slot 0/0.
It does not matter whichever adaptor I select for the cloud. When I go into configure mode for the cloud, I am able to see all the four adaptors. I tried all of them one by one but to no avail.
The funny thing is I am able to connect the CME router to the cloud using ethernet 1/0. However, I am not able to ping the cloud.
My adaptor addresses are:
wireless : 192.168.10.2
VMnet1 : 10.10.1.254
VMnet2 : 192.168.195.1
VMnet3 : 192.168.10.1
I will very much appreciate if you could help me in fixing this problem.
I’m getting the “Max Phones Exceeded” as well through CIPC.
My config:
telephony-service
max-ephones 100
max-dn 500
ip source-address 192.168.1.110 port 2000
auto assign 1 to 2
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
voice register global
max-dn 500
max-pool 192
@jj, Which IOS version are you using and on which Router Model? Seems like you have platform limitation.
Maple-guy.
When connecting the router to the cloud, try make sure you chose to auto connect using fast-ethernet not the manual way.
l found this to be my case that when-ever l use manual connection, all sorts of probs happens with pinging although it is my prefered way.
@Nehoreka, this was a bug in one of GNS3 releases which was put to rest with an updated version.Make sure you have latest GNS3 version .You won’t have ping problem again.
I would prefer you to do connections manually to have a control on your topology configuration.
Cheerz!
hi
i like the gns3. im a great fan of it. im preparing for ccna voice.
every thing worked fine.Im using IOS image c3725-adventerprisek9_ivs-mz.124-15.T6. gns3 version is 6.0. cme files i tried are cme-ful-4.0.0.1.tar and cme-full-4.3.0.0.tar(both didnt work).
but when I try to give archive command
archive tar /xtract tftp://172.16.2.50/cme-ful-4.0.0.1.tar flash:
Im getting error message as :
[ phone/7912/ (directory) 0 (bytes) -- unable to create (Invalid argument)O
extracting phone/7912/CP7912080001SCCP051117A.sbin (340631 bytes)!!
phone/7914/ (directory) 0 (bytes) -- unable to create (Invalid argument)O]
i found no directories created.
why is it happening for me? pls help me in this regard.
Hi, nice to read this tutorial and i’ve tried it for learning ccvp.
I have succeed in establishing the CME and the IP Communicator got the configuration (line, dn, system message, etc) from the CME.
But one problem is that my IP Communicator cannot call other DN. For example I have an IP Communicator with 2 line (and 2 DN of course, which is 1001 and 1002), and when i tried 1001 to call 1002, it can’t, and saying an “unknown number”.
Can you help me with this problem? which step did i miss?
Your help would be very appreciated. Thanks =)
many thanks
it really helped
@Edwin, you cannot setup a call between 2 DN’s on same phone. Use ip blue’s soft phone as second Skinny device , register it with your CUCME .In this way, you will be able to test calls between 2 different IP phones.
@jk, please take your show flash: output and post it here.Erase flash and see if that works.
Hi there…
I love the CCVP CME tutorial. Stupid question; but where can I download the CME to run on the router? And what IOS verison can I use to support CME…
Thanks!!!
@AHA,
Thanks for liking.Go to “Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix” for matching IOS versions with CME.
For you, here is the quick link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
You will find links to download CME/and IOS images in there.
CheerZ!
that is weird, but i’m not able to answer the call coming from another line. The ring happends, but when i press “answer” it immediately disconnects the call.
Any advice?..
I am having the same problem as jk.
Here is the output of my show flash. You can see that not only were directories not created, something else went bad at the 77th file. This is the second time I tried the tftp extraction. I erased the flash (again) before this try. Any help woould be much appreciated. sh flash follows:
Nova#sh flash
System CompactFlash directory:
File Length Name/status
1 18836 bacdprompts/app-b-acd-2.1.2.2-ReadMe.txt
2 24985 bacdprompts/app-b-acd-2.1.2.2.tcl
3 35485 bacdprompts/app-b-acd-aa-2.1.2.2.tcl
4 75650 bacdprompts/en_bacd_allagentsbusy.au
5 83291 bacdprompts/en_bacd_disconnect.au
6 63055 bacdprompts/en_bacd_enter_dest.au
7 37952 bacdprompts/en_bacd_invalidoption.au
8 496521 bacdprompts/en_bacd_music_on_hold.au
9 123446 bacdprompts/en_bacd_options_menu.au
10 42978 bacdprompts/en_bacd_welcome.au
11 34794 bacdprompts/en_bacd_xferto_operator.au
12 20954 CME41-full-readme.txt
13 131470 Desktops/320x212x12/CampusNight.png
14 80565 Desktops/320x212x12/CiscoFountain.png
15 628 Desktops/320x212x12/List.xml
16 109076 Desktops/320x212x12/MorroRock.png
17 108087 Desktops/320x212x12/NantucketFlowers.png
18 10820 Desktops/320x212x12/TN-CampusNight.png
19 9657 Desktops/320x212x12/TN-CiscoFountain.png
20 7953 Desktops/320x212x12/TN-Fountain.png
21 7274 Desktops/320x212x12/TN-MorroRock.png
22 9933 Desktops/320x212x12/TN-NantucketFlowers.png
23 138278 Desktops/320x212x12/Fountain.png
24 4802 gui/admin_user.html
25 657587 gui/admin_user.js
26 1602 gui/CiscoLogo.gif
27 716 gui/CME_GUI_README.TXT
28 953 gui/Delete.gif
29 16344 gui/dom.js
30 864 gui/downarrow.gif
31 6146 gui/ephone_admin.html
32 4658 gui/logohome.gif
33 3724 gui/normal_user.html
34 81443 gui/normal_user.js
35 1347 gui/Plus.gif
36 843 gui/sxiconad.gif
37 174 gui/Tab.gif
38 2431 gui/telephony_service.html
39 870 gui/uparrow.gif
40 9968 gui/xml-test.html
41 3412 gui/xml.template
42 496521 music-on-hold.au
43 2489775 phone/7945-7965/apps45.8-3-1-22.sbn
44 555373 phone/7945-7965/cnu45.8-3-1-22.sbn
45 2444849 phone/7945-7965/cvm45sccp.8-3-1-22.sbn
46 326254 phone/7945-7965/dsp45.8-3-1-22.sbn
47 555217 phone/7945-7965/jar45sccp.8-3-1-22.sbn
48 638 phone/7945-7965/SCCP45.8-3-2S.loads
49 642 phone/7945-7965/term45.default.loads
50 642 phone/7945-7965/term65.default.loads
51 331483 phone/7902/CP7902080001SCCP051117A.sbin
52 338840 phone/7905/CP7905080001SCCP051117A.sbin
53 338424 phone/7905/CP7905080001SCCP051117A.zup
54 2455679 phone/7906-7911/apps11.8-2-2ES1.sbn
55 439073 phone/7906-7911/cnu11.8-2-2ES1.sbn
56 2146813 phone/7906-7911/cvm11sccp.8-2-2ES1.sbn
57 302171 phone/7906-7911/dsp11.8-2-2ES1.sbn
58 377390 phone/7906-7911/jar11sccp.8-2-2ES1.sbn
59 662 phone/7906-7911/SCCP11.8-2-2SR1S.loads
60 662 phone/7906-7911/term06.default.loads
61 662 phone/7906-7911/term11.default.loads
62 349794 phone/7910/P00405000700.bin
63 350198 phone/7910/P00405000700.sbn
64 340631 phone/7912/CP7912080001SCCP051117A.sbin
65 49169 phone/7914/S00104000100.sbn
66 49599 phone/7914/S00105000200.sbn
67 1045952 phone/7920/cmterm_7920.4.0-02-00.bin
68 1702519 phone/7921/APPS-1.0.1.SBN
69 871 phone/7921/CP7921G-1.0.1.LOADS
70 1447362 phone/7921/GUI-1.0.1.SBN
71 2078210 phone/7921/SYS-1.0.1.SBN
72 893001 phone/7921/TNUX-1.0.1.SBN
73 2196478 phone/7921/TNUXR-1.0.1.SBN
74 1296760 phone/7921/WLAN-1.0.1.SBN
75 2455679 phone/7931/apps31.8-2-2ES1.sbn
76 439794 phone/7931/cnu31.8-2-2ES1.sbn
77 2141605 phone/7931/cvm31sccp.8-2-2ES1.sbn [invalid checksum]
78 302171 phone/7931/dsp31.8-2-2ES1.sbn [invalid checksum]
79 376618 phone/7931/jar31sccp.8-2-2ES1.sbn [invalid checksum]
80 643 phone/7931/SCCP31.8-2-2SR1S.loads [invalid checksum]
81 643 phone/7931/term31.default.loads [invalid checksum]
82 1908762 phone/7935/P00503010100.bin [invalid checksum]
83 1755410 phone/7936/cmterm_7936.3-3-12-0.bin [invalid checksum]
84 1706643 phone/7936/cmterm_7936.3-3-5-0.bin [invalid checksum]
85 129828 phone/7940-7960/P00308000400.bin [invalid checksum]
86 461 phone/7940-7960/P00308000400.loads [invalid checksum]
87 701768 phone/7940-7960/P00308000400.sb2 [invalid checksum]
88 130232 phone/7940-7960/P00308000400.sbn [invalid checksum]
89 2759 phone/7940-7960/Readme7960-40.txt [invalid checksum]
90 2453223 phone/7941-7961/apps41.8-2-2ES1.sbn [invalid checksum]
91 435144 phone/7941-7961/cnu41.8-2-2ES1.sbn [invalid checksum]
92 2141085 phone/7941-7961/cvm41sccp.8-2-2ES1.sbn [invalid checksum]
93 509001 phone/7941-7961/dsp41.8-2-2ES1.sbn [invalid checksum]
94 229364 phone/7941-7961/jar41sccp.8-2-2ES1.sbn [invalid checksum]
95 642 phone/7941-7961/SCCP41.8-2-2SR1S.loads [invalid checksum]
96 642 phone/7941-7961/term41.default.loads [invalid checksum]
97 642 phone/7941-7961/term61.default.loads [invalid checksum]
98 2489775 phone/7942-7962/apps42.8-3-1-22.sbn [invalid checksum]
99 555298 phone/7942-7962/cnu42.8-3-1-22.sbn [invalid checksum]
100 2442564 phone/7942-7962/cvm42sccp.8-3-1-22.sbn [invalid checksum]
101 326254 phone/7942-7962/dsp42.8-3-1-22.sbn [invalid checksum]
102 443408 phone/7942-7962/jar42sccp.8-3-1-22.sbn [invalid checksum]
103 658 phone/7942-7962/SCCP42.8-3-2S.loads [invalid checksum]
104 662 phone/7942-7962/term42.default.loads [invalid checksum]
105 662 phone/7942-7962/term62.default.loads [invalid checksum]
106 2453223 phone/7970-7971/apps70.8-2-2ES1.sbn [invalid checksum]
107 435605 phone/7970-7971/cnu70.8-2-2ES1.sbn [invalid checksum]
108 2142700 phone/7970-7971/cvm70sccp.8-2-2ES1.sbn [invalid checksum]
109 509001 phone/7970-7971/dsp70.8-2-2ES1.sbn [invalid checksum]
110 474988 phone/7970-7971/jar70sccp.8-2-2ES1.sbn [invalid checksum]
111 642 phone/7970-7971/SCCP70.8-2-2SR1S.loads [invalid checksum]
112 642 phone/7970-7971/term70.default.loads [invalid checksum]
113 642 phone/7970-7971/term71.default.loads [invalid checksum]
114 2489775 phone/7975/apps75.8-3-1-22.sbn [invalid checksum]
115 555378 phone/7975/cnu75.8-3-1-22.sbn [invalid checksum]
116 2444048 phone/7975/cvm75sccp.8-3-1-22.sbn [invalid checksum]
117 326254 phone/7975/dsp75.8-3-1-22.sbn [invalid checksum]
118 557596 phone/7975/jar75sccp.8-3-1-22.sbn [invalid checksum]
119 638 phone/7975/SCCP75.8-3-2S.loads [invalid checksum]
120 642 phone/7975/term75.default.loads [invalid checksum]
121 14997798 phone/7985/cmterm_7985.4-1-2-0.bin [invalid checksum]
122 8160 ringtones/Analog2.raw [invalid checksum]
123 8160 ringtones/Bass.raw [invalid checksum]
124 5280 ringtones/AreYouThere.raw [invalid checksum]
125 5040 ringtones/AreYouThereF.raw [invalid checksum]
126 16040 ringtones/Chime.raw [invalid checksum]
127 8160 ringtones/Classic1.raw [invalid checksum]
128 16080 ringtones/Classic2.raw [invalid checksum]
129 9600 ringtones/Drums1.raw [invalid checksum]
130 13440 ringtones/Drums2.raw [invalid checksum]
131 10800 ringtones/ClockShop.raw [invalid checksum]
132 2823 ringtones/DistinctiveRingList.xml [invalid checksum]
133 8160 ringtones/Jamaica.raw [invalid checksum]
134 15840 ringtones/FilmScore.raw [invalid checksum]
135 16080 ringtones/HarpSynth.raw [invalid checksum]
136 495 ringtones/RingList.xml [invalid checksum]
137 16080 ringtones/KotoEffect.raw [invalid checksum]
138 8160 ringtones/Piano1.raw [invalid checksum]
139 15360 ringtones/Piano2.raw [invalid checksum]
140 9360 ringtones/Pop.raw [invalid checksum]
141 7200 ringtones/Pulse1.raw [invalid checksum]
142 4000 ringtones/Ring1.raw [invalid checksum]
143 4000 ringtones/Ring2.raw [invalid checksum]
144 4000 ringtones/Ring3.raw [invalid checksum]
145 4000 ringtones/Ring4.raw [invalid checksum]
146 4000 ringtones/Ring5.raw [invalid checksum]
147 4000 ringtones/Ring6.raw [invalid checksum]
148 4000 ringtones/Ring7.raw [invalid checksum]
149 14160 ringtones/Sax2.raw [invalid checksum]
150 10800 ringtones/Sax1.raw [invalid checksum]
151 16080 ringtones/Vibe.raw [invalid checksum]
152 12240 ringtones/CallBack.raw [invalid checksum]
153 8160 ringtones/Analog1.raw [invalid checksum]
154 12720 ringtones/MusicBox.raw [invalid checksum]
[79656020 bytes used, 188779432 available, 268435452 total]
262144K bytes of ATA System CompactFlash (Read/Write)
i forgot to mention, the first time i tried, it only got to the 57th file before things started going foul.
cheers
hi, i am having the same problem as jk. this is what is displayed during the extraction:
Zira#archive tar /xtract tftp://192.168.123.1/cme-basic-4.1.0.2.tar flash:
Loading cme-basic-4.1.0.2.tar from 192.168.123.1 (via FastEthernet0/0): !
extracting CME41-basic-readme.txt (10035 bytes)
gui/ (directory) 0 (bytes) — unable to create (Invalid argument)
extracting gui/admin_user.html (4802 bytes)
extracting gui/admin_user.js (657587 bytes)!!
extracting gui/CiscoLogo.gif (1602 bytes)
extracting gui/CME_GUI_README.TXT (716 bytes)
extracting gui/Delete.gif (953 bytes)
extracting gui/dom.js (16344 bytes)
extracting gui/downarrow.gif (864 bytes)
extracting gui/ephone_admin.html (6146 bytes)
extracting gui/logohome.gif (4658 bytes)
extracting gui/normal_user.html (3724 bytes)
extracting gui/normal_user.js (81443 bytes)!
extracting gui/Plus.gif (1347 bytes)
extracting gui/sxiconad.gif (843 bytes)
extracting gui/Tab.gif (174 bytes)
extracting gui/telephony_service.html (2431 bytes)
extracting gui/uparrow.gif (870 bytes)
extracting gui/xml-test.html (9968 bytes)
extracting gui/xml.template (3412 bytes)
extracting music-on-hold.au (496521 bytes)!!
phone/ (directory) 0 (bytes) — unable to create (Invalid argument)
phone/7906-7911/ (directory) 0 (bytes) — unable to create (Invalid argument)
extracting phone/7906-7911/apps11.8-2-2ES1.sbn (2455679 bytes)!!!!!!!!!
extracting phone/7906-7911/cnu11.8-2-2ES1.sbn (439073 bytes)O!!
extracting phone/7906-7911/cvm11sccp.8-2-2ES1.sbn (2146813 bytes)!!!!!!!!
extracting phone/7906-7911/dsp11.8-2-2ES1.sbn (302171 bytes)O!!
and then the sh flash afterwards is:
Zira#sh flash
System CompactFlash directory:
File Length Name/status
1 10035 CME41-basic-readme.txt
2 4802 gui/admin_user.html
3 657587 gui/admin_user.js
4 1602 gui/CiscoLogo.gif
5 716 gui/CME_GUI_README.TXT
6 953 gui/Delete.gif
7 16344 gui/dom.js
8 864 gui/downarrow.gif
9 6146 gui/ephone_admin.html
10 4658 gui/logohome.gif
11 3724 gui/normal_user.html
12 81443 gui/normal_user.js
13 1347 gui/Plus.gif
14 843 gui/sxiconad.gif
15 174 gui/Tab.gif
16 2431 gui/telephony_service.html
17 870 gui/uparrow.gif
18 9968 gui/xml-test.html
19 3412 gui/xml.template
20 496521 music-on-hold.au
21 2455679 phone/7906-7911/apps11.8-2-2ES1.sbn
22 439073 phone/7906-7911/cnu11.8-2-2ES1.sbn
23 2146813 phone/7906-7911/cvm11sccp.8-2-2ES1.sbn
24 302171 phone/7906-7911/dsp11.8-2-2ES1.sbn
25 377390 phone/7906-7911/jar11sccp.8-2-2ES1.sbn
26 662 phone/7906-7911/SCCP11.8-2-2SR1S.loads
27 662 phone/7906-7911/term06.default.loads
28 662 phone/7906-7911/term11.default.loads
29 1702519 phone/7921/APPS-1.0.1.SBN
would really appreciate some advice. thanks
i am using 3745 IOS and when trying to install CME i am getting a message that there is not enough space. i tried cme full as well as basic. can you tell me what i can do inorder to install the CME package for the lab
Hi,
I am trying to follow this tutorial. When I am trying to configure, it is also asking for Phone MAC Address. How do I get this and is this SIP Phone MAC Address or I need to have actual VoIP Phone?
Any help is appreciated.
Jagdeep Yadav
hi , i did the steps for making a call between the router and the sjphone but i catn im getting and error not sure why hope someone can help me i get this ouput with debug ccsip all
Router#debug ccsip error
*Mar 1 00:21:20.959: %SYS-5-CONFIG_I: Configured from csim start 2222
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(8)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:21:23.627: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
Router#un all
All possible debugging has been turned off
Router#debug ccsip all
This may severely impact system performance. Continue? [confirm]
All SIP Call tracing is enabled
Router#csim start 2222
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(9)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:26:56.355: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added
context(0x64B52614) with key=[9] to table
*Mar 1 00:26:56.359: //9/000000000000/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
*Mar 1 00:26:56.359: //9/000000000000/SIP/Info/ccsip_call_setup_request: Before
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:26:56.359: //9/000000000000/SIP/Info/ccsip_call_setup_request: This i
s a TDM-IP call: callID= 9, peer_callID = -1
*Mar 1 00:26:56.363: //9/000000000000/SIP/Info/ccsip_call_setup_request: After
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:26:56.363: //9/DF0914DF801A/SIP/Info/sipSPIGetOutboundHostAndDestHost
: CCSIP: target_host : 192.168.5.2 target_port : 5060
*Mar 1 00:26:56.363: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_SETUP
*Mar 1 00:26:56.367: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 2
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIUaddccCallIdToTable: Addin
g call id 9 to table
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: preferred_c
odec set[0] type :No Codec bytes: 0
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPICanSetFallbackFlag: Local
Fallback is not active
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: Not using V
oice Class Codec
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: xcoder high
-density disabled
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: Flow Mode s
et to FLOW_THROUGH
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIValidateAndCopyOutboundHos
t: CCSIP: copy target_host to outbound_host
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Info/ccsip_set_cc_cause_for_spi_err:
Categorized cause:47, category:180
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Info/sipSPIInitiateDisconnect: Initia
te call disconnect(47) for outgoing call
*Mar 1 00:26:56.383: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_set_release_source_for_pe
er: ownCallId[9], src[6]
*Mar 1 00:26:56.383: //9/DF0914DF801A/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTAT
E_NONE)
*Mar 1 00:26:56.383: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
*Mar 1 00:26:56.391: //9/DF0914DF801A/SIP/Info/ccsip_call_statistics: Stats are
not supported for IPIP call.
*Mar 1 00:26:56.391: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
*Mar 1 00:26:56.395: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 7
*Mar 1 00:26:56.399: //9/DF0914DF801A/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_DISCONNECTING, SUBSTATE_NONE) to (STATE_DEAD, SUBSTAT
E_NONE)
*Mar 1 00:26:56.399: //9/DF0914DF801A/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x64B52614
State of The Call : STATE_DEAD
TCP Sockets Used : YES
Calling Number :
Called Number : 2222
Source IP Address (Sig ): 0.0.0.0
Destn SIP Req Addr:Port : 0.0.0.0:0
Destn SIP Resp Addr:Port : 0.0.0.0:0
Destination Name :
*Mar 1 00:26:56.403: //9/DF0914DF801A/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 47
Disconnect Cause (SIP) : 200
*Mar 1 00:26:56.403: //9/DF0914DF801A/SIP/Info/sipSPIUdeleteccCallIdFromTable:
Removing call id 9
*Mar 1 00:26:56.403: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: C
ontext for key=[9] removed.
*Mar 1 00:26:56.407: //9/DF0914DF801A/SIP/Info/sipSPIFlushEventBufferQueue: The
re are 0 events on the internal queue that are going to be free’d
*Mar 1 00:26:56.407: //9/DF0914DF801A/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 6
4B52614
Hi i tried to connect sjphone to the router like the video but im not able to call i can ping the ip of the sjphone from the router but no call if i do a debug ccsip all i see this any help will be really appreciated
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(6)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:18:56.115: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added
context(0x64B4FF48) with key=[6] to table
*Mar 1 00:18:56.119: //6/000000000000/SIP/State/sipSPIChangeState: 0x64B4FF48 :
State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
*Mar 1 00:18:56.119: //6/000000000000/SIP/Info/ccsip_call_setup_request: Before
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:18:56.119: //6/000000000000/SIP/Info/ccsip_call_setup_request: This i
s a TDM-IP call: callID= 6, peer_callID = -1
*Mar 1 00:18:56.123: //6/000000000000/SIP/Info/ccsip_call_setup_request: After
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:18:56.123: //6/C0CA47EE8011/SIP/Info/sipSPIGetOutboundHostAndDestHost
: CCSIP: target_host : 192.168.5.2 target_port : 5060
*Mar 1 00:18:56.123: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_SETUP
*Mar 1 00:18:56.127: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 2
*Mar 1 00:18:56.131: //6/C0CA47EE8011/SIP/Info/sipSPIUaddccCallIdToTable: Addin
g call id 6 to table
*Mar 1 00:18:56.131: //6/C0CA47EE8011/SIP/Info/sipSPIGetCallConfig: preferred_c
odec set[0] type :No Codec bytes: 0
*Mar 1 00:18:56.131: //6/C0CA47EE8011/SIP/Info/sipSPICanSetFallbackFlag: Local
Fallback is not active
*Mar 1 00:18:56.135: //6/C0CA47EE8011/SIP/Info/sipSPIGetCallConfig: Not using V
oice Class Codec
*Mar 1 00:18:56.135: //6/C0CA47EE8011/SIP/Info/sipSPIGetCallConfig: xcoder high
-density disabled
*Mar 1 00:18:56.135: //6/C0CA47EE8011/SIP/Info/sipSPIGetCallConfig: Flow Mode s
et to FLOW_THROUGH
*Mar 1 00:18:56.135: //6/C0CA47EE8011/SIP/Info/sipSPIValidateAndCopyOutboundHos
t: CCSIP: copy target_host to outbound_host
*Mar 1 00:18:56.139: //6/C0CA47EE8011/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:18:56.139: //6/C0CA47EE8011/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:18:56.139: //6/C0CA47EE8011/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:18:56.139: //6/C0CA47EE8011/SIP/Info/ccsip_set_cc_cause_for_spi_err:
Categorized cause:47, category:180
*Mar 1 00:18:56.143: //6/C0CA47EE8011/SIP/Info/sipSPIInitiateDisconnect: Initia
te call disconnect(47) for outgoing call
*Mar 1 00:18:56.143: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_set_release_source_for_pe
er: ownCallId[6], src[6]
*Mar 1 00:18:56.143: //6/C0CA47EE8011/SIP/State/sipSPIChangeState: 0x64B4FF48 :
State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTAT
E_NONE)
*Mar 1 00:18:56.143: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
*Mar 1 00:18:56.155: //6/C0CA47EE8011/SIP/Info/ccsip_call_statistics: Stats are
not supported for IPIP call.
*Mar 1 00:18:56.155: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
*Mar 1 00:18:56.159: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 7
*Mar 1 00:18:56.159: //6/C0CA47EE8011/SIP/State/sipSPIChangeState: 0x64B4FF48 :
State change from (STATE_DISCONNECTING, SUBSTATE_NONE) to (STATE_DEAD, SUBSTAT
E_NONE)
*Mar 1 00:18:56.163: //6/C0CA47EE8011/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x64B4FF48
State of The Call : STATE_DEAD
TCP Sockets Used : YES
Calling Number :
Called Number : 2222
Source IP Address (Sig ): 0.0.0.0
Destn SIP Req Addr:Port : 0.0.0.0:0
Destn SIP Resp Addr:Port : 0.0.0.0:0
Destination Name :
*Mar 1 00:18:56.163: //6/C0CA47EE8011/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 47
Disconnect Cause (SIP) : 200
*Mar 1 00:18:56.167: //6/C0CA47EE8011/SIP/Info/sipSPIUdeleteccCallIdFromTable:
Removing call id 6
*Mar 1 00:18:56.167: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: C
ontext for key=[6] removed.
*Mar 1 00:18:56.167: //6/C0CA47EE8011/SIP/Info/sipSPIFlushEventBufferQueue: The
re are 0 events on the internal queue that are going to be free’d
*Mar 1 00:18:56.171: //6/C0CA47EE8011/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 6
4B4FF48un all
All possible debugging has been turned off
Router#debug ccsip error
SIP Call error tracing is enabled
Router#csim start 2222
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(7)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:19:33.223: //7/D6E74A1F8014/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:19:33.223: //7/D6E74A1F8014/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:19:33.223: //7/D6E74A1F8014/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:19:33.227: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
Router#sh co
Router#sh co
Router#sh co?
compress configuration connection context
control-plane controllers cops
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#dial/pee
Router(config)#dial-pee
Router(config)#dial-peer vo 1 voip
Router(config-dial-peer)#code
Router(config-dial-peer)#codec ?
clear-channel Clear Channel 64000 bps (No voice capabilities: data transport
only)
g711alaw G.711 A Law 64000 bps
g711ulaw G.711 u Law 64000 bps
g722-48 G722-48K 64000 bps – Only supported for H.320H.323 calls
g722-56 G722-56K 64000 bps – Only supported for H.320H.323 calls
g722-64 G722-64K 64000 bps – Only supported for H.320H.323 calls
g723ar53 G.723.1 ANNEX-A 5300 bps (contains built-in vad that cannot be
disabled)
g723ar63 G.723.1 ANNEX-A 6300 bps (contains built-in vad that cannot be
disabled)
g723r53 G.723.1 5300 bps
g723r63 G.723.1 6300 bps
g726r16 G.726 16000 bps
g726r24 G.726 24000 bps
g726r32 G.726 32000 bps
g728 G.728 16000 bps
g729br8 G.729 ANNEX-B 8000 bps (contains built-in vad that cannot be
disabled)
g729r8 G.729 8000 bps
ilbc iLBC 13330 or 15200 bps
Router(config-dial-peer)#codec g711
Router(config-dial-peer)#codec g711a
Router(config-dial-peer)#codec g711alaw
Router(config-dial-peer)#exit
Router(config)#exit
Router#debug ccsip error
*Mar 1 00:21:20.959: %SYS-5-CONFIG_I: Configured from csim start 2222
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(8)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:21:23.623: //8/18B4FD138017/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:21:23.627: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
Router#un all
All possible debugging has been turned off
Router#debug ccsip all
This may severely impact system performance. Continue? [confirm]
All SIP Call tracing is enabled
Router#csim start 2222
csim: called number = 2222, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(9)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#
*Mar 1 00:26:56.355: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added
context(0x64B52614) with key=[9] to table
*Mar 1 00:26:56.359: //9/000000000000/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
*Mar 1 00:26:56.359: //9/000000000000/SIP/Info/ccsip_call_setup_request: Before
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:26:56.359: //9/000000000000/SIP/Info/ccsip_call_setup_request: This i
s a TDM-IP call: callID= 9, peer_callID = -1
*Mar 1 00:26:56.363: //9/000000000000/SIP/Info/ccsip_call_setup_request: After
processing SETUP REQccb->pld.flags_ipip = 200
*Mar 1 00:26:56.363: //9/DF0914DF801A/SIP/Info/sipSPIGetOutboundHostAndDestHost
: CCSIP: target_host : 192.168.5.2 target_port : 5060
*Mar 1 00:26:56.363: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_SETUP
*Mar 1 00:26:56.367: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 2
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIUaddccCallIdToTable: Addin
g call id 9 to table
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: preferred_c
odec set[0] type :No Codec bytes: 0
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPICanSetFallbackFlag: Local
Fallback is not active
*Mar 1 00:26:56.371: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: Not using V
oice Class Codec
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: xcoder high
-density disabled
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIGetCallConfig: Flow Mode s
et to FLOW_THROUGH
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Info/sipSPIValidateAndCopyOutboundHos
t: CCSIP: copy target_host to outbound_host
*Mar 1 00:26:56.375: //9/DF0914DF801A/SIP/Error/sipSPIOutgoingCallSDP: Could no
t create source SDP for Outgoing Call
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Error/sipSPICreateOutboundSDP: Error
in creating an SDP for the outbound call – Check for supported codecs
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Error/preprocessSetup: Error during o
utbound SDP creation
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Info/ccsip_set_cc_cause_for_spi_err:
Categorized cause:47, category:180
*Mar 1 00:26:56.379: //9/DF0914DF801A/SIP/Info/sipSPIInitiateDisconnect: Initia
te call disconnect(47) for outgoing call
*Mar 1 00:26:56.383: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_set_release_source_for_pe
er: ownCallId[9], src[6]
*Mar 1 00:26:56.383: //9/DF0914DF801A/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTAT
E_NONE)
*Mar 1 00:26:56.383: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_spi_process_ccapi_event:
CCAPI Event Preprocessor Failure
*Mar 1 00:26:56.391: //9/DF0914DF801A/SIP/Info/ccsip_call_statistics: Stats are
not supported for IPIP call.
*Mar 1 00:26:56.391: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event
from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
*Mar 1 00:26:56.395: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_even
t: ccsip_spi_get_msg_type returned: 3 for event 7
*Mar 1 00:26:56.399: //9/DF0914DF801A/SIP/State/sipSPIChangeState: 0x64B52614 :
State change from (STATE_DISCONNECTING, SUBSTATE_NONE) to (STATE_DEAD, SUBSTAT
E_NONE)
*Mar 1 00:26:56.399: //9/DF0914DF801A/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x64B52614
State of The Call : STATE_DEAD
TCP Sockets Used : YES
Calling Number :
Called Number : 2222
Source IP Address (Sig ): 0.0.0.0
Destn SIP Req Addr:Port : 0.0.0.0:0
Destn SIP Resp Addr:Port : 0.0.0.0:0
Destination Name :
*Mar 1 00:26:56.403: //9/DF0914DF801A/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 47
Disconnect Cause (SIP) : 200
*Mar 1 00:26:56.403: //9/DF0914DF801A/SIP/Info/sipSPIUdeleteccCallIdFromTable:
Removing call id 9
*Mar 1 00:26:56.403: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: C
ontext for key=[9] removed.
*Mar 1 00:26:56.407: //9/DF0914DF801A/SIP/Info/sipSPIFlushEventBufferQueue: The
re are 0 events on the internal queue that are going to be free’d
*Mar 1 00:26:56.407: //9/DF0914DF801A/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 6
4B52614
Good morning,
I’m starting now with GNS3, I need to do this lab work for a major in college .. but I’m having some doubts …
It configures the router using the IOS image c3725-ipvoicek9-mz.124-9.T.bin. SolarWinds TFTP setup with the IP address 192.168.15.6 same address as the Loopback adapter, when you start the Cisco IP Communicator is an error stating that can not find two files in the path c: \ TFTP-root of the TFTP root directory exists but this empty …
could help me … I think some settings missing
I apologize for writing English in Brazil and used the google translator ..
thank you very much
@Chris/Hector,I couldn’t follow up with you earlier.Is your problem solved by now?
@Jagdeep, before using Csim to simulate a call, first make sure you have a valid DN e.g 2222 should exist on your network and
you should have VOIP dial-peer for it. Secondly, you CANNOT use an ip address with csim start command.
@Daniel,First place files in root directory of your TFTP server and then try to upload them to router.
Thanks
@Munira,Not sure what you mean by trying to install CME ? You have to extact .tar files into flash and then follow tutorial.Make sure your show flash: shows available/required disk space.If you need to increase disk space,follow my tutorial on “how to increase flash disk size”.Thanks
Nice
I can call from my sip phone to my 7960, but when i try to call from the 7960 back to the sip phone i get the busy tone.
I have tried x-lite and also a siemens sip phone, both have the exact same problem.
Any help would be fantastic.
Heres a config dump:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface FastEthernet0/0
bind media source-interface FastEthernet0/0
registrar server expires max 3600 min 600
transport switch udp tcp
!
!
!
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
!
!
!
voice register global
mode cme
source-address 172.17.0.4 port 5060
max-dn 5
max-pool 5
timezone 48
hold-alert
tftp-path flash:
create profile sync 000141568230605A
!
voice register dn 1
number 110
name Cordless
no-reg
label Cordless – 110
!
voice register pool 1
id mac 0*************
number 1 dn 1
max registrations 24
dtmf-relay rtp-nte sip-notify
voice-class codec 1
username 110 password c****
Tom,Which IOS/CME version are you running?Try to make sure you aren’t running an older version because they seemed to have bugs with SIP/SCCP dtmf interworkings as audio path was blocked in one-way or the other.Here,i am assuming you are registering SIP and SCCP phones to same CME router.Try to do some debugs e.g ‘debug ccsip message’ , ‘debug voip ccapi inout’ and ‘debug sccp message’.Hope this helps!
hi, I have the same issue as i am having the same problem as jk, and chri
unable to create directories
please help
mas, Chris, JK – I, too, experienced the invalid checksum and failure when using the archive tar command. Kicked me for a couple of days….
Try formatting the compact flash using the format flash: command. It formats the card with a dos format allowing it to create the directories requested in the archive process.
see -
http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_cflash.html
Good luck
Master:
Good sunday to you, i have the following config:
GNS3>>wlancard>>switch<<LANcard<<PC<<GNS3
GNS working ok but not able to ping betwen external physical devicess and GNS3 devices even tried bridged connections for the physical cards is it a limitation of the program or what can i do?
Namaste.