Skype for SIP Service (or SkypeConnect) is a service which allows you to use your SIP Based PBX (e.g CUCME / CUCM) & integrate it into Skype Service. By Using Online Number & Business User feature , you can receive calls not only from traditonal PSTN e.g landlines/cellphones but also from millions of Skype contacts/users […]

Read more about Cisco Unified CME Integration to SkypeConnect (Skype for SIP) Service »

  If you have gone through all previous parts of this tutorial, you haveĀ  learned to configure CUCME for SIP trunk support to a VOIP SIP Internet Service Provider (ITSP) ,configuringĀ  Inbound and outbound dial peers for call routing as well as configuring and supporting IP phones(e.g.CIPC).This is the last part of tutorial in which […]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 3 »

In last 2 tutorials , I configured CUCME for basic sip trunk setup to a VOIP Internet Telephony Service Provider (ITSP) as well as configured advanced configuration for inbound and outbound dial-peer setup and call processing.In this tutorial, I will be setting up Cisco IP Communicator (CIPC) for making/receiving calls to/from SIP VOIP Service Provider. […]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 2 »

  In previous tutorial GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 1, my focus was to register CUCME as a SIP User Agent Client(UAC) to a Internet Telephony Service Provider (ITSP). In this tutorial, I will show you the steps needed to setup CUCME for routing VOIP calls outbound […]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider -Advanced Config -Part1b »

This tutorial will demonstrate process of setting up a Session Initiatition Protocol (SIP) trunk on Cisco Unified Express Communication Manager Express (CUCME) to SIP Voice Over IP (VOIP) Service Provider. It will be divided into several parts. This is first part in which you will learn to setup Basic SIP trunking with VOIP service provider. […]

Read more about GNS3:How to Setup CME SIP trunk to VOIP SIP Service Provider – Part 1 »

In a previous tutorial, i demonstrated how we can register Third party SIP Softphone with Cisco Unified Communication Manager 5.x/6.x . In this tutorial, i will use another Softphone ‘ SJphone ‘.For multiple line capability(upto 6 lines/phone), use ExpressTalk .Basically, there can be two ways in which

Read more about GNS3:How to Use a Third party SIP phone with Cisco Router »

hide totop
  • RSS
  • Facebook
  • Twitter
  • RSS
  • Facebook
  • Twitter